It's possible that you just need to temporarily restore Bluetooth functionality to the app. Please don't delete the sensor from the app while you try these steps.
First, check to see that your mobile device's Bluetooth is ON.
Next, check to see if the Bluetooth is on in the SensorPush app as well. Here's how:
1.) Open the app, and from the main screen (the screen with the word "Devices" at the top) select the button in the top left to open app settings.
2.) Once in app settings you'll notice a section called "Configuration" with a switch for Bluetooth. Switch it ON.
Then, bring the phone into close range of the sensors (e.g. same room) and leave the app open for 10 to 15 minutes. This should help wake them up and put the sensor device fully into its regular power mode. If the sensor lost its settings when the battery ran low, the app can also repair it automatically during this time (make sure you have the latest version of the app).
One last thing to try is to re-add the sensor to the app essentially like it's a new sensor. The app will show the message "SENSOR IS ALREADY PAIRED AS" followed by the sensor's name. That's expected, and it will also re-activate the sensor.
If none of the above works, see Why is my sensor not working after I changed the battery? for more things to check (battery direction, the right battery type, and battery voltage), or contact us at support@sensorpush.com