Most customers will not need this information. It's for networks with firewalls or other specific security measures in place. If you are in a corporate or other enterprise environment, you may need to provide this information to your IT staff.
Incoming connections are not required. The Gateway only makes outbound connections, on these ports:
- G2 WiFi Gateway: TCP port 443, and UDP port 123 (NTP). If port 443 is blocked, the G2 automatically tries TCP port 8883 instead.
- G1 WiFi Gateway: ports 80 and 443, and UDP port 123 (NTP).
All of the data the Gateway sends to the SensorPush cloud is encrypted.
Firewalls That Inspect or Scan Traffic
Some business firewalls decrypt and inspect secure (TLS/SSL) traffic, or hold file downloads while they scan them. The G2 can't work through either:
- It signs in to the SensorPush cloud with its own security certificate, so it can't connect through a firewall that decrypts its traffic.
- It downloads firmware updates from updates.sensorpush.com. A firewall that holds or slows the download to scan it can make the update fail.
If your network does either, add *.sensorpush.com to the firewall's exemption list (sometimes called a bypass or allow list).
Other Network Requirements
- The G2 WiFi Gateway needs a 2.4 GHz WiFi network. The G1 WiFi Gateway can use a 2.4 GHz WiFi network or a wired Ethernet connection.
- Your network must assign addresses automatically (DHCP) and provide working DNS. Static IP addresses are not supported.
- For WiFi, the G2 supports WPA2, WPA3 and open networks. The G1 supports WPA/WPA2, WEP and open networks. Networks that need a web sign-in page (like many hotels and guest networks) are not supported by either gateway.
Also, you can get MAC address information in the app during set up. It will appear once the Gateway has connected to the mobile device during configuration. For a Gateway that's already set up, go to the same room as the Gateway, select it from the "Devices" screen in the app, and choose the "Configure" option. Once your phone connects to the Gateway, you'll see its MAC addresses. A G2 shows its WiFi MAC address, and a G1 shows its WiFi and Ethernet MAC addresses.
Testing Your Network
To check that your network can reach the SensorPush cloud, connect a phone or computer to the same network and open https://sensorpush.com/apitest in a web browser. You should see a short text response that includes "status":"ok". If you don't, something on the network is blocking the connection. For more help, see My gateway is offline / cannot access the internet.