VPD stands for "vapor pressure deficit." It is the difference between how much moisture the air could hold if it were fully saturated and how much moisture it actually holds. Growers use it to manage plants in greenhouses and grow rooms, because it affects how quickly plants give off water through their leaves (transpiration). If VPD is too low, plant growth slows and problems like mold can appear. If it is too high, plants can become stressed.
Which Sensors Show VPD?
The SensorPush app calculates VPD from the temperature and humidity readings of the HT1, HT.w and HTP.xw sensors.
How Do I Turn It On?
- In the SensorPush app, tap the sensor in the main list, then tap the button in the upper-right corner of the graphs screen to open the sensor's settings.
- Scroll down to "VPD" and turn it on.
- Optionally, set a "Leaf Temperature Offset." Leaves are usually a little cooler than the surrounding air, and this offset lets the app account for that. Negative values mean the leaves are cooler than the air. If you're not sure, many growers use an offset of about -2°F to -4°F (-1°C to -2°C).
Just like other measurements, you can also set high and low limits for VPD and enable alerts if you like. For more detail, tap the info button next to VPD in the app.