If you want to remove a Gateway from your account so it can be used on a different account, or because you want to sell it or give it away, follow the steps below. Removing the Gateway this way also unlocks it, so the next owner can set it up on their own account.
Before You Start
Removing a Gateway is not a troubleshooting step. If your Gateway is offline or not reporting, please don't remove it. Instead, see My gateway is offline / cannot access the internet, or contact us at support@sensorpush.com. If many things stopped working at once, check status.sensorpush.com first, in case the problem is on our end.
How to Remove and Unlock Your Gateway
- Make sure the Gateway is plugged in, and that you are within Bluetooth range of it (for example, in the same room).
- Make sure Bluetooth is on for your phone or tablet.
- Open the SensorPush app, and from the main screen (the screen with the word "Devices" at the top) tap the button in the top left to open app settings.
- In the section called "Gateway Account," check that the account the Gateway belongs to is listed and marked active. If it isn't, tap "Switch To" next to it, or add it with "Add Gateway Account."
- In the section called "Configuration," make sure the Bluetooth switch is on.
- Return to the main screen and tap the Gateway you want to remove.
- Tap "REMOVE GATEWAY." The app will connect to the Gateway over Bluetooth. This can take a moment.
- When asked to confirm, tap "Remove and Unlock" (on Android, tap "Yes").
That's it. The Gateway is removed from your account and unlocked, so it can be set up on a different account. These steps are the same for the G1 WiFi Gateway and the G2 WiFi Gateway.
What If the App Can't Connect to the Gateway?
If your phone can't connect to the Gateway (for example, because you are not near it), the app will offer "REMOVE WITHOUT UNLOCKING." The app will explain what this means before you confirm.
This removes the Gateway from your app, but the Gateway may stay locked to your account. The next owner may have to reset it by holding their phone right up against it during setup before they can use it. If you are selling or giving a Gateway away, it's much smoother for them if you go back to the Gateway, get within Bluetooth range, and use "Remove and Unlock" instead.
If you've already removed a Gateway without unlocking it, you can add it to the app again while you are near it, then remove it again with "Remove and Unlock."
Received a Gateway That's Still on Someone Else's Account?
If you bought or were given a Gateway that is still locked to its previous owner's account, see My Gateway is locked to another account. The app offers a "Reset Gateway" option when you hold your phone against the Gateway during setup. If it doesn't, contact us at support@sensorpush.com and we'll help.
Deleting Your Account?
Remove and unlock each of your Gateways before you delete your SensorPush account. Otherwise, anyone who sets up that Gateway later, including you, will first have to reset it by holding their phone right up against it.