G2 WiFi Gateway
The USB-C jack on the G2 WiFi Gateway is its power input. Plug the included USB-C cable into it and into the included charger, which supplies 5 volts / 1 amp. Any USB charger or battery bank that supplies 5 volts and at least 1 amp will also work.
G1 WiFi Gateway
The USB jack on the G1 WiFi Gateway is simply a back-up method for powering the Gateway, for places where it is not easy to use the regular power adapter.
If you have a male-to-male USB cable and a phone charger with 5 volts / 2 amps, you can power the Gateway through its USB port.
A Handy Test If Your G1 Gateway Has No Light
Power adapters wear out more often than Gateways do. If your G1 Gateway shows no light, try powering it through the USB jack with a 5 volt / 2 amp phone charger. If the light comes on, the original power adapter is the problem, not the Gateway. The regular adapter is DC 5V / 2A, with a barrel connector that is 5.5mm outside and 2.1mm inside, so any adapter with the same specifications will also work. Let us know at support@sensorpush.com either way and we'll help you get running again.