UP AND RUNNING BASICS
Whether you are using a SensorPush sensor on its own, or with a SensorPush WiFi Gateway, the initial setup (a.k.a. pairing) process is the same.
- Go to sensorpush.com/apps from your iOS or Android device and install the SensorPush app.
- Open the app. Tap the add button in the top-right corner of the main "Devices" screen, then choose "Add Sensor."
- On Android, the app may first show a "Required Settings" screen. Tap "FIX" next to each item (such as Bluetooth and Nearby Devices) so the app can find your sensors.
- Hold your sensor against the screen and keep it over the moving image.
- After a few moments, the app will connect and move to the next screen. If the sensor needs a firmware update, the app installs it automatically. This takes about a minute, so keep the sensor close and leave the app open until it finishes.
- Then you can give the sensor a name (e.g. "Attic" or "Wine Cellar"). You can also set up alerts if you like. Don't worry! You can easily return to this screen at any time to change these settings.
There's no need to pair the sensor in your phone's Bluetooth settings. SensorPush sensors won't appear there; the app handles everything.
If you also have a SensorPush WiFi Gateway, proceed to the gateway setup instructions now that you've set up your sensors (the order isn't important though, so if you set up the Gateway first, don't panic!)
The following is a video of the steps above.
I TRIED THAT AND NOTHING'S HAPPENING. NOW WHAT?
We're really sorry you're having trouble. The following steps will almost certainly get the system up and running though.
- Turn Bluetooth off in your phone's settings, wait a moment and then turn it back on.
- Then retry the setup process. Be sure that you go back to the main screen of the app and tap "Add Sensor" again to fully restart the process when you try again.
- If that fails, completely exit the app and reboot your phone. Then start over, making sure that you begin from the main screen of the app.
- Move any other SensorPush sensors to another room while you add the new one, so the app doesn't pick up the wrong sensor.
If none of the above has worked and you have a Gateway that you have already paired, it is possible that Bluetooth is switched off in the SensorPush app itself. The app turns it off when you sign in to your Gateway account. To turn it back on for pairing, do the following:
- Open the app, and from the main screen (the screen with the word "Devices" at the top) select the button in the top left to open app settings.
- Once in app settings you'll notice a section called "Configuration" with a switch for Bluetooth. Switch it ON (you can turn it off again once all new devices are paired).
For more troubleshooting, including the "already paired" message and battery problems, see What does "Add Sensor Error" mean and how do I fix it?
If you're still having trouble, please contact us at support@sensorpush.com for more assistance.