SensorPush works great for monitoring conditions in RVs, boats, remote cabins, vacation properties, and other locations where traditional WiFi isn't available. You can use a mobile hotspot from your phone or a dedicated cellular hotspot device to provide internet connectivity for your Gateway.
What You'll Need
To monitor your sensors remotely using a mobile hotspot, you'll need three things: your SensorPush sensors, a SensorPush G1 WiFi Gateway, and a source of WiFi (either your phone's personal hotspot or a dedicated cellular hotspot device like a Jetpack).
iPhone Hotspot: Enable "Maximize Compatibility"
By default, iPhones create hotspots using 5GHz WiFi, which doesn't work with the SensorPush Gateway. The Gateway requires 2.4GHz WiFi.
To enable 2.4GHz on your iPhone hotspot: Open the Settings app and tap "Personal Hotspot." Turn on the "Maximize Compatibility" option. This enables the 2.4GHz band that the Gateway needs.
Android Hotspot
Android phones vary significantly. Most Android hotspots support 2.4GHz by default. Look for options like "WiFi Band," "AP Band," or "Frequency Band" and select 2.4GHz if available.
Dedicated Cellular Hotspot Devices
Products like Verizon Jetpacks, AT&T Nighthawks, T-Mobile hotspots work well with the SensorPush Gateway. These devices typically support 2.4GHz WiFi by default.
Starlink and Satellite Internet
If your Gateway connects to Starlink's WiFi but shows no internet connection, open the Starlink app and navigate to the Network section. Look for device permissions and ensure the Gateway is allowed to access the internet.
Power Considerations
The Gateway needs constant power to operate. Unlike the battery-powered sensors, the Gateway must be plugged in at all times. For RV and boat installations, consider where you'll source power. The Gateway can be powered via its included power adapter, but it can also be powered with a USB A-to-A cable connected to any USB phone charger (including 12V car chargers for mobile installs) or even a USB battery bank for temporary use.