Sometimes a gateway is moved to a new location where the WiFi network is different, or a router is replaced so the network name and/or password are no longer the same. In these cases, you can point the gateway at the new network from the SensorPush app.
You don't need to remove the gateway or re-add your sensors. Your gateway stays on your account, your sensors stay paired, and your history is kept. Please don't remove the gateway from the app to fix a WiFi change; it makes things harder, not easier.
Before you start
- Make sure you are using the most up-to-date version of the SensorPush app. Check for an update in the App Store (iPhone and iPad) or Google Play (Android).
- Make sure your router is broadcasting a 2.4 GHz network (or is in "dual band" mode). The gateway can't connect to 5 GHz-only networks. If you can't enable 2.4 GHz, you can connect the G1 WiFi Gateway with an Ethernet cable instead and skip the steps below.
- Make sure you're logged into the account the gateway belongs to. From the main screen (the screen with the word "Devices" at the top), tap the settings button in the top left. Your account email is listed in the "Gateway Account" section.
Change the WiFi network
- Go into the same room as the gateway. If there is an Ethernet cable plugged into the gateway, remove it for now.
- Make sure Bluetooth is on, both on your mobile device and inside the SensorPush app (the "Bluetooth" switch in the "Configuration" section of app settings).
- Return to the main screen of the app and tap the gateway.
- Tap "Configure". Hold your mobile device within a few feet of the gateway. It might take a minute to connect.
- Select your WiFi network and enter its password. When the gateway has connected, you'll see a green checkmark next to the network.
If it doesn't connect
Power the gateway off and then on again (unplug it and plug it back in), restart your mobile device, and then try the steps above again.
Tips
- If the password isn't accepted or your network doesn't appear, go back to the main screen, tap the gateway, and tap "Configure" to try again.
- If your network is hidden, choose "Join Other Network" at the bottom of the list and type the network name exactly as it's set on your router.
- Mesh systems such as eero can hide the 2.4 GHz network from the gateway. See My Gateway won't connect to WiFi for steps.
- Some newer routers turn away the G1 WiFi Gateway because of a security setting. See check your router's PMF / 802.11w setting.
- Using a phone's hotspot or a cellular hotspot? See Using SensorPush with a mobile hotspot.
Reach out to support@sensorpush.com if you have difficulties connecting after a network change.