SensorPush works great for monitoring conditions in RVs, boats, remote cabins, vacation properties, and other locations where traditional WiFi isn't available. You can use a mobile hotspot from your phone or a dedicated cellular hotspot device to provide internet connectivity for your Gateway.
What You'll Need
To monitor your sensors remotely using a mobile hotspot, you'll need three things: your SensorPush sensors, a SensorPush WiFi Gateway (G1 or G2), and a source of WiFi (either a phone's personal hotspot or a dedicated cellular hotspot device like a Jetpack).
The Hotspot Has to Stay With the Gateway
The Gateway only stays online while the hotspot is on and nearby. If you use your phone's hotspot and then take your phone with you, the Gateway goes offline and you won't get readings or alerts until the hotspot is back. For monitoring while you're away, use a hotspot that stays on site: a dedicated cellular hotspot device, or a spare phone left plugged in next to the Gateway.
iPhone Hotspot: Enable "Maximize Compatibility"
By default, newer iPhones create hotspots using 5GHz WiFi, which doesn't work with the SensorPush Gateway. The Gateway requires 2.4GHz WiFi.
To enable 2.4GHz on your iPhone hotspot: Open the Settings app and tap "Personal Hotspot." Turn on the "Maximize Compatibility" option. This enables the 2.4GHz band that the Gateway needs. If you don't see this option, your iPhone already uses 2.4GHz.
If the iPhone hotspot doesn't appear in the Gateway's list of WiFi networks during setup, turn Personal Hotspot off and back on. This "wakes" the hotspot so it broadcasts its network again. If it still doesn't appear, tap "Join Other Network" at the bottom of the list and type the hotspot's name (your iPhone's name, shown on the Personal Hotspot screen) and its WiFi password exactly.
Android Hotspot
Android phones vary significantly. Most Android hotspots support 2.4GHz by default. Look for options like "WiFi Band," "AP Band," or "Frequency Band" and select 2.4GHz if available.
Dedicated Cellular Hotspot Devices
Products like Verizon Jetpacks, AT&T Nighthawks, T-Mobile hotspots work well with the SensorPush Gateway. These devices typically support 2.4GHz WiFi by default.
Starlink and Satellite Internet
If your Gateway connects to Starlink's WiFi but shows no internet connection, open the Starlink app and navigate to the Network section. Look for device permissions and ensure the Gateway is allowed to access the internet.
Power Considerations
The Gateway needs constant power to operate. Unlike the battery-powered sensors, the Gateway must be plugged in at all times. For RV and boat installations, consider where you'll source power. The G2 WiFi Gateway runs on USB-C power, so besides its included charger it can run from a USB car charger or a USB battery bank, as long as it supplies 5 volts and at least 1 amp. A larger battery bank will keep it running longer. The G1 WiFi Gateway can be powered via its included power adapter, but it can also be powered with a USB A-to-A cable connected to a USB charger rated at 5 volts / 2 amps (including 12V car chargers for mobile installs) or even a USB battery bank for temporary use. A weaker charger can keep the G1 from starting up or staying connected.
For more help getting connected, see My Gateway won't connect to WiFi.