The line of sight range with no obstructions is rated at 100 meters (about 325 feet), but this is based on completely wide open space, with line of sight between the transmitter and receiver. Real-world conditions will almost inevitably reduce that ideal range. It's impossible to say how a particular set of conditions will affect things exactly without testing, since every situation is different (obstructions, radio interference, etc). Generally speaking though, the sensors will work well throughout an average-sized home, or in the same or perhaps adjacent room with them inside a refrigerator or freezer, etc. Again though, it's all very dependent upon the specifics of the installation, so testing and perhaps a bit of trial and error can be necessary.
With obstructions in place, particularly if there is also a substantial distance involved, often the signal strength and connection reliability can be very dependent upon small changes in placement. One thing to keep in mind is that water, or anything containing water (like virtually all food, living things, etc) is a very efficient absorber of Bluetooth signals. Metal blocks the signal too, so metal walls, appliances, shelving and the walls of a freezer all make a big difference. Keep this in mind when placing the equipment.
Additionally, the transmission strength can depend even on the relative orientations of the antennae, so it's worth even playing with the orientations of the sensor and/or the gateway antenna to see if you can improve things that way.
It's best to just change one thing at a time and watch for a bit to see if things improve. If the devices are communicating intermittently, that's an indication that the system is right on the edge of getting enough signal to work reliably, so any small improvements can make the difference.
Tips for Freezers, Coolers and Outbuildings
- Test first: set the sensor right next to the Gateway and confirm it's updating, then move it to its final spot. That tells you whether a problem is the sensor or the distance.
- For a freezer or refrigerator, place the sensor near the door and put the Gateway just outside, as close as you can.
- Plan on one Gateway per building. A sensor in a barn, garage or shed usually won't reach a Gateway in the house.
- WiFi extenders and mesh WiFi systems don't extend the sensors' Bluetooth range. To cover more area, add another Gateway. All the Gateways on your account work together automatically (see Can I use multiple gateways with a single account?).
For more on choosing where to put your sensors, see Where should I place my sensor?
Learn more here: https://www.sensorpush.com/articles/signal-range-and-sensorpush-products