Sure!
Many people and businesses use SensorPush to monitor their fridge or freezer, or even commercial walk-in coolers.
There are some important things to keep in mind, however.
Temperature range
SensorPush sensors work from -40°C to 60°C (-40°F to 140°F). That covers household refrigerators and freezers and most commercial walk-ins and reach-ins. Ultra-low freezers (for example -80°C / -112°F lab freezers) are colder than the sensor is designed for.
Signal strength and range
Signal strength / range will be less, because the signal has to travel through the walls of the equipment. Generally this is pretty easy to work around, as long as you know what to expect. In a normal refrigerator or freezer, you'll still likely get a good signal in the same room or even in adjacent or nearby rooms, but the range won't be as long as it would be if the sensor wasn't inside. Particularly when placing a SensorPush WiFi Gateway, this is important to keep in mind. You'll want to have the gateway relatively close to the refrigeration equipment, and if for other reasons you need it to be a bit farther away, a little trial and error may be required to make sure you have a reliable connection.
Another important thing to understand about signal strength that is particularly important in food refrigeration equipment is that water is a very effective absorber of Bluetooth signals. Since virtually all food products contain a large percentage of water, this is important to keep in mind. The usable range can vary significantly based upon how the sensor is placed within the equipment.
A few tips that help:
- Place the sensor near the door and away from the back wall, so the signal has less food and metal to pass through.
- Before you put the sensor inside, check that it reports well when it's sitting right next to the gateway. Then move it into place and watch it for a day.
- Walk-in coolers and freezers often have metal walls, which block Bluetooth well. Put the gateway as close to the door as you can, ideally just outside it. The G2 WiFi Gateway is small and runs from a USB-C charger, so it's easy to place right where you need it.
Learn more about signal strength and SensorPush devices in these articles:
Signal Range and SensorPush Products
What is the Wireless Range of SensorPush Sensors?
Battery life in the cold
Batteries are less efficient at cold temperatures, so battery life will be somewhat less. In a refrigerator, this effect is relatively minor. In very cold freezers, you might need to change the battery more often, perhaps every 6-12 months instead of the usual interval (typically over 1 year for the HT1, and over 2 years for the HT.w and HTP.xw in normal conditions). Cold batteries can also briefly show a low reading, so a low-battery warning from a sensor in a freezer doesn't always mean the battery is empty. For freezers, a CR2477X battery, which is designed for colder temperatures, is a good choice.
Learn more about battery life and changing batteries here:
How Long Will the Battery Last? And How Do I Change the Battery?
Where can I find reliable batteries?
Remote monitoring and alerts
Finally, for sensitive applications like these, we recommend combining the sensors with a G2 WiFi Gateway. Particularly since the range is reduced from inside refrigeration equipment, the best way to be sure you're always up to date and alerted when things go wrong is with the SensorPush Cloud and a WiFi Gateway. If you already have a G1 WiFi Gateway, it works for this too.
Learn more about the SensorPush Cloud and WiFi Gateways here:
Do I need a SensorPush WiFi Gateway, or can I just use the sensor?
What if the internet or power to my gateway goes down? Will I still get alerts?